How to Hire
Call rentareedbed on +44 (0) 1984 624989 or email enquiries@rentareedbed.com to discuss your requirements with the team
What we may require from you:
-
Assessment of the volume of effluent to treat per day
-
An up-to-date waste analysis showing BOD, COD, Ammonia N, Phosphorous, pH, Suspended solids and Chloride
-
Site description with indicative levels, showing a discharge location*
We can then calculate the number and configuration of the modules for effective treatment.
* Note you may need a discharge consent from the Environment Agency if the volume of waste is more than 5m3 per day, please see the attached links to the Environment Agency website.
Installation
All our modules are delivered for your project fully fitted-out, and are installed by our professional team. An electrical supply may be required if pumps are needed to transfer effluents, or alternatively we have systems that can run using 12 volts or recharged from renewable resources.
Our systems are designed on the plug and play principle and can be connected in a variety of combinations:
1. Vertical treatment system for initial pre-treatment and nitrogen removal
2. Horizontal treatment systems for mixed treatment and nutrient/pathogen removal.
Due to the modular design these systems can be configured to meet your site requirements either in blocks, lines or stacked.
For more details please click here and download the PDF document about the system.
Hire Charges
The hire charge is based on the treatment volume, effluent strength and number of modules required.
This website is © of rentareedbed 2008
Rentareedbed
Higher Ford
Wiveliscombe
Somerset TA4 2RL
Tel: 01984 624989
Fax: 01984 623912
email: